1300 217 623

Scorpion II TL-3 MASH Truck Mounted Attenuator

100KM/H P/N 100BC-5211
  • The Scorpion II TL-3 TMA from TrafFix Devices is the world's first MASH Tested, Passed, and Eligible Truck Mounted Attenuator. The Scorpion II TL-3 Truck Mounted Attenuator is hydraulically powered and is ideal for stationary and mobile construction zones. Available exclusively in Australia from A1 Roadlines.

    Click on picture to view TMA Guidelines, Approval Letters, Manuals, Software & MDR Download Instructions

Overview

The Scorpion II Truck Mounted Attenuator (TMAs) from TrafFix Devices is the world's first MASH Tested, Passed, and Eligible Truck Mounted Attenuator.

TMAs are designed to protect workers and motorists from impacts with stationary or slow-moving trucks utilised in work zones and maintenance operations. The TMA is mounted to a shadow vehicle for purposes of protecting the work crew in front of the shadow vehicle and protecting the motorist that might drive into the lane closed off by the shadow vehicle.

MASH 2016 TESTING REQUIREMENTS

MASH 2016 Sections 2.2.3.1 and 2.2.3.2 defines support vehicle selection for TMA testing procedures. "During a TMA crash, the support truck is accelerated forward as the impacting vehicle is decelerated. Hence, the total velocity change during a TMA impact is strongly related to the mass of the support truck. Heavier support trucks will produce higher impacting vehicle velocity changes and require greater energy dissipation by the TMA. On the other hand, support trucks that are too light could produce high accelerations for the operator and excessive roll-ahead distance, which is the length of travel of the support truck during the impact".

TESTS 50 and 51 - Both tests should be conducted with the heaviest allowable support truck or a rigidly blocked support truck for no upper support-truck weight limit.

TEST 52 - Test should be conducted with the heaviest allowable support truck or a rigidly blocked support truck for no upper support-truck weight limit ("infinity weight)".

TEST 53 - Test should be conducted with the lightest allowable support truck.

SCORPION II TESTING

The Scorpion II TL-3 TMA was tested as per MASH 2016 requirements with the support vehicle blocked to simulate a support vehicle of very high weight or "infinite weight". By doing so required the Scorpion II TMA to dissipate 100 % of the impacting energy without the benefit of forward roll. As a result the MASH Scorpion II is the only Truck Mounted Attenuator to have been tested and passed to infinite weight.

Higher Speed/Excess Capacity TMA - The Scorpion II also successfully tested and passed the high speed UK test (UK-TD49-07) which requires an impact of 110 kph with a 1500 kg midsize car.

There are TMA's produced that will pass tests 3-50, 3-51 and 3-52 with a lighter support vehicle, but may not pass MASH impact tests with a "high weight" or blocked support vehicle.

Infinite Weight Eligible - Can be used on a host truck vehicle weight of only 6,804 kg up to infinite weight

Curved Aluminium Tube Frame - Exceptionally strong, providing protection against nuisance impacts with re-directional capacity along the entire length of the TMA.

Energy Absorbing Cushions - Moisture proof aluminium honeycomb core, enclosed by aluminium powder coated modules providing maximum durability and longevity.

Modular Design - When impacted, the Scorpion II crushes in progressive stages, which results in lower repair costs and easy parts replacement.

Open Cartridge Design - Reduces wind resistance and increases fuel efficiency in storage and transport mode.

Full Width Impact Protection - Safely protects and redirects the impacting vehicle away from the "coffin corner" area at the rear of the truck.

ACCREDITATION

* MASH Tested, Passed And Eligible

* Austroads Recommended For Acceptance

* Department Of Transport (Previously Known As VicRoads) Approved

* Transport For NSW (Previously Known As Roads & Maritime Services) Approved

* Department Of Transport and Main Roads (QLD) Approved

* Main Roads Western Australian Approved

* Department Of Infrastructure, Planning And Logistics (NT) Approved

* Department Of Planning, Transport and Infrastructure (SA) Approved

Specifications

Length (From Rear Of Chassis) Width Height (TMA Only) Height (From Ground) - Deployed Weight (TMA Only)
4225 mm 2475 mm 600 mm 305 mm ± 25.4 mm 900 kg

Crash Test

TL-3 Crash Test 1
TL-3 Crash Test 2
TL-3 Crash Test 3
TL-3 Crash Test 4

Optional Extras

Passenger Harness
Spill Kit
Fire Extinguisher
Shovel & Fire Extinguisher
Auxiliary Battery
ABE & Foam Fire Extinguishers
Underrun Protection
Battery Isolator Switches
In Cabin Overhead Control
Wheel Nut Indicators
Light Bar

Literature

NSW
VIC
QLD
WA
National
Highways England
Scorpion I TL-3 NCHRP-350 Installation Manual
Scorpion I TL-3 NCHRP-350 Replacement Parts Guide
Scorpion II TL-3 MASH Assembly & Installation Manual
Scorpion II TL-3 MASH Replacement Parts Guide
MDR404-500 Installation & Operation Guide
MDR504-500 Installation & Operation Guide
Download Instructions via Laptop or PC
USB Firmware Update & Message Upload
User-Interface For Wanco Message Signs
Wanco Message Graphics User's Manual
TL-3 MASH TMA

Software & Instructions

400 & 500 Series Software
Video Download Instructions
VMS Message Update (2260mm x 1250mm) - July 2020
VMS Firmware Update V 6.52
VMS Message Upload Instructions
VMS Message Listing (2260mm x 1250mm) - July 2020
VMS Messages Graphics